دانلود کتاب انگلیسی سینماتیک و دینامیک ماشینهای مارتین

در این کتاب مبانی سینماتیک و دینامیک ماشینها تشریح شده است. مطالعه آن برای قبولی در کنکور کارشناسی ارشد بسیار مفید است.
دانلود کتاب مبانی، کاربردها و عملکرد چیلرهای آبی تهویه مطبوع و برجهای خنک کن-ویرایش دوم HVAC Water Chillers and Cooling Towers Fundamentals, Application, and Operation, Second Edition

… این محتوا تنها برای اعضای ویژه و سطح مشخص می باشد.ورود ثبت نام...
دانلود کتاب جریان مافوق صوت و امواج ضربه Supersonic Flow and Shock Waves

در این کتاب تئوری جریان مافوق صوت و امواج ضربه به زبان ریاضی تشریح گردیده است.
دانلود کتاب لایه های برشی آشفته در جریان مافوق صوت Turbulent Shear Layers in Supersonic Flow

The aims of this book are to bring together the most recent results on the behavior
of turbulent boundary layers at supersonic speed and to present some
conclusions regarding our present understanding of these flows. By doing so,
we hope to give the reader a general introduction to the field, whether they be
students or practicing research engineers and scientists, and to help provide a
basis for future work in this area. Most textbooks on turbulence or boundary
layers contain some background on turbulent boundary layers in supersonic
flow, but the information is usually rather cursory, or it is out of date. Only
one, by Kutateladze and Leont’ev (1964), addresses the specific issue of turbulent
boundary layers in compressible gases, but it focuses largely on solutions
of the integral equations of motion, and it is not much concerned with the turbulence
itself. Some aspects of turbulence are addressed by Cousteix (1989),
but only one chapter is devoted to this topic, and his review, although very
useful, is not exhaustive. The scope of the present book is considerably wider
in that we are concerned with physical descriptions of turbulent shear-layer
behavior, and the response of the mean flow and turbulence to a wide variety
of perturbations. For example, in addition to turbulent mixing layers, we will
consider boundary layers on flat plates, with and without pressure gradient,
on curved walls, and the interaction of boundary layers with shock waves, in
two and three dimensions.
دانلود کتاب مقدمه ای بر جریان ماوراء صوت Introduction to Hypersonic flow

Although other books in the field of hypersonic flow are now published
in EngUsh, it was felt that this book should be made available to
the Enghsh speaking reader because of its usefulness for those individuals
desirous of obtaining an introduction to the subject. Except for
a general introductory chapter the book concentrates on the inviscid,
perfect fluid aspects of hypersonic flow, with emphasis on the fundamental
concepts and rational methods of calculation. The book is
directed to students of aerodynamics and gasdynamics, as well as to
scientists and engineers interested in problems of hypersonic flight. The
level of approach is such that it should prove particularly useful as an
undergraduate and introductory graduate text.
دانلود کتاب MICRO-CHP POWER GENERATION FOR RESIDENTIAL AND SMALL COMMERCIAL BUILDINGS

Micro-cooling, heating, and power (micro-CHP) is decentralized electricity
generation coupled with thermally activated components for residential and small
commercial applications. A micro-CHP system consists of a prime mover, such as
a reciprocating engine, which drives a generator, which produces electrical power.
The waste heat from the prime mover is recovered and used to drive thermally
activated components and to produce hot water or warm air through the use of
heat exchangers.
دانلود کتاب پمپهای حرارتی برای گرمایش و سرمایش پایدارHeat Pumps for Sustainable Heating and Cooling

This book aims to highlight the significance of using sustainable energy to prevent
degradation of the globe. Energy sustainability can be achieved through improved
energy efficiency. Heat pump provides an energy-efficient alternative for heating
and cooling. To this end, we focus on examining sustainable practices in heat pump
system design for sustainable buildings.
دانلود کتاب دینامیک سیالات – حرارتی جریان دوفازی Thermo-Fluid Dynamics of Two-Phase Flow

This book is intended to be an introduction to the theory of thermo-fluid
dynamics of two-phase flow for graduate students, scientists and practicing
engineers seriously involved in the subject. It can be used as a text book at
the graduate level courses focused on the two-phase flow in Nuclear
Engineering, Mechanical Engineering and Chemical Engineering, as well as
a basic reference book for two-phase flow formulations for researchers and
engineers involved in solving multiphase flow problems in various
technological fields.
دانلود کتاب ایرفویل ها و پره های توربین بادی Wind Turbine Airfoils and Blades

This book is divided into eleven chapters. Chapter 1 introduces relevant research on
wind turbine airfoils and blades; Chapter 2 introduces the foundations of aerodynamic
theory for wind turbine airfoils and the aerodynamic performance prediction method;
Chapter 3 introduces integrated expression theory for wind turbine airfoils in detail;
Chapter 4 illustrates the theory of parametric optimization for wind turbine airfoils;
Chapter 5 introduces the design and manufacture of an airfoil model, experiments on
the wind turbine airfoil and data analysis; Chapter 6 illustrates the aerodynamics of
wind turbine rotors and tip-loss corrections; Chapter 7 introduces integrated representations
for wind turbine blade shapes; Chapter 8 introduces shape optimization
of wind turbine blades; Chapter 9 illustrates the structural optimization of composite
wind turbine blades; Chapter 10 introduces the analysis of aeroelastic coupling of
the wind turbine blades; Chapter 11 introduces the aeroelastic stability analysis of
two-dimensional airfoil sections for wind turbine blades.
دانلود کتاب سوختهای زیستی و نقل و انتقال جاده ای Biofuels for Road Transport

This book will give a seed-to-wheel perspective on biofuels for road transport and
will deal with a number of environmental issues that have emerged in the current
biofuel debate. This first chapter is introductory and structured as follows: firstly,
Sects. 1.2–1.6 will deal with the physical basis and the variety of biofuels and the
ways to produce and apply them in transport. Secondly, in Sect. 1.7, developments
in production volume, costs and prices will be discussed. Thereafter, in Sect. 1.8, the
debate on the pros and cons of transport biofuels that has emerged will be briefly
surveyed, and the rest of the book will be outlined.